Thompson's 10 Year Roof Seal is a high performance elastomeric coating which cures to form a durable, flexible membrane suitable for resealing and protecting whole roofs or repairing large areas of damage to a variety of roofing materials. The 10 year elastomeric formulation is designed to flex with the natural movement of the roof protecting the membrane from cracking and splitting over time. UV light stable iron oxide pigments provide a protective shield against harmful UV radiation ensuring 10 year weatherproofing performance under extreme conditions. For best results the advanced formula should be applied directly to dry surfaces, the 10 year formulation forms a vapour permeable membrane that repairs and weatherproofs whilst allowing any trapped moisture in the substrate to escape.
Suitable for use on a variety of roofing materials, felt, asphalt, slate, tiles, concrete, brick, corrugated metal and wood.
2 mē/litre .
Allow 6 hours for the first coat to dry the second coat can be applied within a day
1L, 2.5L, 4L
Suitable for using over existing roof coatings
For maximum weatherproofing performance remove dust, dirt and any loose chippings or flaking material. Neutralise any rusty corrugated metal with a proprietary rust treatment and treat any fungal growth with fungicide, following manufacturer's instructions and wash off thoroughly. Repair any structural faults. Use Thompson's 10 Year Roof Seal to fill any cracks and level any depressions where ponding could occur. Where major joint movement may occur embed a reinforcing scrim bandage into the first coat of Thompson's 10 Year Roof Seal before applying a second coat. Old felt blisters should be cut open and any retained moisture allowed to dry before securing the felt with tacks.
Thompson's 10 Year Roof Seal can be applied by brush, roller or a soft broom. Brush out a coat of Thompson's 10 Year Roof Seal. Allow the first coat to dry for 6 hours then apply the second coat for long lasting protection. Thompson's 10 Year Roof Seal REQUIRES NO PRIMER, however in very dusty, dirty or porous areas or areas likely to pond a diluted first coat should be applied - two parts Thompson's 10 Year Roof Seal to one part water. Allow to dry before applying two further coats of Thompson's 10 Year Roof Seal. Brush out a coat of Thompson's 10 Year Roof Seal allowing the first coat to dry for 6 hours then apply the second coat for long lasting protection.
Clean brushes, rollers and other equipment immediately after use with detergent and warm water. Remove as much product as possible from application equipment before cleaning.