Eco Chem Patio & Paving Cleaner

Thompson's Ecochem Patio & Paving Cleaner revitalises bricks, patios, tiles, floors and concrete. Contains no hydrochloric acid making it pet and plant friendly.


Fast Acting

Doesn't Contain Hydrochloric Acid

Safe to use around plants

Suitable for use on:

Patios, paving, brick, tile and concrete

Stockists near you

Weather forecast

Please share your location to receive an accurate weather forecast



Come rain or shine, Thompson's got it covered

Working Time

5 - 10 MINUTES




m2 / litre




For light staining dilute the cleaner; 1 part cleaner to 10 parts water.

For medium staining dilute the cleaner; 1 part cleaner to 5 parts water.

For heavy staining dilute the cleaner; 1 part cleaner to 1 part water.

Mix together in a plastic bucket. Do not mix with any other chemicals.

Make sure all porous surfaces are completely wet with clean water before you apply the cleaner.

Take care when applying near decorative surfaces, and always test an inconspicuous area before applying our Ecochem Patio & Paving Cleaner.

You can use a brush or a low pressure spray (avoid using a very fine mist) to apply this product.

Move from the top downwards and work in 1m sections. Ensure each area is fully saturated before moving on to the next section.

Leave to work for 5 to 10 minutes, then use cold clean water to give the surface a good scrub clean. DO NOT allow the product to dry in.

Clean up immediately after, and thoroughly rinse any spills or misapplied product.

Rinse wet porous surfaces thoroughly after application, removing all traces of Thompson’s Ecochem Patio & Paving Cleaner.

Clean all equipment in warm water and detergent