Paving Protection? Tackle it with Thompson’s!

Just laid a beautiful new patio? Great stuff! But don’t leave it there. Protecting a patio, or driveway, is crucial for keeping them in top condition.

Dirt and fallen leaves can quickly pile up on surfaces like sandstone and concrete. Plus, stains from decaying leaves can become hard to clean if they are left to sink into a porous surface. The UK's damp weather also encourages algae, mould and mildew, making patios and paths dirty and slippery.

To help keep a patio looking good, use a sealant. Thompson’s One Coat Patio and Block Paving Seal is a waterproofing solution that helps repel water and protects against ground in dirt, stains and algae. It can be used on granite, limestone, sandstone, block paving, and flagstones.

For best results, apply it on a dry, mild day. On colder days be aware that drying may take longer.

Before application, ensure the block paving, jointing sand and slabs are completely dry. Then, shake the tin well and use a brush to apply the sealant in long, smooth strokes for better coverage and a thicker layer. Short on time? A long-pile roller gives a faster application. If you've textured block paving, spread any pooled sealant into dry spots for an even coat.

Unless the paving surface is very rough, one coat is all you need. If you do need a second, wait four hours before reapplying. Thompson’s One Coat Patio and Block Paving Seal is touch-dry in an hour, and you can walk on it after four hours. However, it’s best not to put anything heavier or bulkier on the surface for a day.

By investing in quality cleaning products and proper maintenance, a patio will stay looking its best all year round.